Connecting Network And Power Source - TECOM IP2092B User Manual

WEB IP PHONE - USER MANUAL

Connecting network and power source

To connect the AC power:
(1) Connect a network cable between the LAN jack on the phone and the LAN port on the
wall or hub/switch device port.
(2) Connect the DC plug on the power adapter to the DC 5V/2A jack marked on the phone.
To connect the PoE:
Connect a network cable (regular CAT5 cable) between the LAN jack on the phone and an
available power and data port on a PoE (IEEE 802.3af) compliant switch.
9