Usb Playback - Sony CDX-G1080UM Operating Instructions Manual

USB playback

You cannot play back items via a USB hub.
 This unit cannot recognize USB devices via a
USB hub.
A USB device takes longer to play back.
 The USB device contains files with a
complicated tree structure.
The sound is intermittent.
 The sound may be intermittent at a high-bit-
rate of more than 320 kbps.
Error displays/Messages
ERROR
 The disc is dirty or inserted upside down.
 Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
 Insert another disc.
 USB device was not automatically recognized.
 Connect it again.
 Press  to remove the disc.
HUB NO SUPRT (hubs not supported)
 USB hub is not supported on this unit.
NO DEV (no device)
 [USB] is selected as source without a USB
device connected. A USB device or a USB
cable has been disconnected during
playback.
 Be sure to connect a USB device and USB
cable.
NO MUSIC
 The disc or USB device does not contain a
music file.
 Insert a music CD.
 Connect a USB device with a music file in it.
OVERLOAD
 USB device is overloaded.
 Disconnect the USB device, then change
the source by pressing SRC.
 The USB device has a fault, or an
unsupported device is connected.
PUSH EJT (push eject)
 The disc cannot be ejected.
 Press  (eject).
16
GB
READ
 The unit is reading all track and album
information on the disc.
 Wait until reading is complete and
playback starts automatically. Depending
on the disc structure, it may take more than
a minute.
USB NO SUPRT (USB not supported)
 The connected USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site.
[ ] or [
 During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
[ ]
 The character cannot be displayed.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
CD playback trouble, bring the disc that was
used at the time the problem began.
]