40
Shutter
This motorcycle is equipped with a shutter in the
ignition switch. Close the shutter when leaving the
motorcycle unattended for theft prevention.
To close the shutter, remove the ignition key, align the
projection (1) of the shutter key (2) with the shutter
slot (3) and turn the shutter key counterclockwise, or
move the knob (4) to SHUT.
To open the shutter, align the shutter key projection
with the shutter slot and turn the shutter key
clockwise.
(3)
(1)
ATTENTION
The shutter is a safety device and has a magnetic
security code. Be careful not to lose the shutter key.
Otherwise it will be necessary to replace the shutter
assembly as a unit.
(1) Projection
(2) Shutter key
(3) Slot
(2)
CLOSE
(4)
OPEN
Owner's Manual
(4) knob