Memory Transmissions And Quick Memory Tx; Memory Transmission; Quick Memory Transmission - Konica Minolta bizhub C450 Fax Manual

Transmission
3.12

Memory transmissions and quick memory TX

There are two ways to send documents with this machine.

3.12.1 Memory transmission

With memory transmission, all pages being sent are first scanned and stored
in memory before transmission. The document is automatically numbered by
total page number, and the images on the first page are shown on commu-
nication results report.
However, when a large number of pages are sent or when the images on the
originals are sent at high resolution.
The machine is automatically set to memory TX when any of the following
procedures is performed.
- [Quick Memory TX] is set on the comm. setting screen.

3.12.2 Quick memory transmission

In this transmission method, a facsimile is sent as soon as each page is
scanned. This allows documents to be sent without exceeding memory ca-
pacity in the case of sending a large number of pages.
!
Detail
In the case of the quick memory RX, the "Memory" on the screen remains
unchanged.
C450
3
3-41