First-Use Settings; Must-Set Items - Konica Minolta bizhub C450 Fax Manual

Before use
2.3

First-use settings

2.3.1

Must-set items

After installation, you must set the following items to use the facsimile func-
tions. You will not be able to execute the fax communication if these items
are not set properly.
- Header information
– Registers the fax number and name of this facsimile.
- Telephone line settings
– Sets the telephone line and the receiving method.
Header information
Set the following items.
!
Detail
For details, refer to "Header information" on page 11-28.
Item
Sender name
Sender fax no.
Telephone line settings
Set the following items.
!
Detail
For details, refer to "Telephone line settings" on page 11-34.
Item
Dialing method
Receive mode
C450
Description
Set the name of this machine. The name is a string of up to 30
characters. The name can contain with any alphanumeric charac-
ter and symbols.
Set the fax number of this machine. The fax ID is a number of up
to 20 digits. The ID can contain any number between 0 and 9, the
+ symbol, spaces, * symbol, and # symbol.
Description
Select between tone dialing line and pulse dial line (PB, pulse).
Select between automatic reception and manual reception.Select
"Auto RX" for automatic reception.
Select "Manual RX" if you often receive calls to an external hand-
set connected to this machine.
2
2-7