Transmission applications
4
Press [OK].
–
To release the setting, press [Cancel].
The scan setting screen will be restored.
5
Press [OK].
The fax screen will be restored.
6
Set other functions if necessary.
–
See "Setting transmission conditions" on page 3-11 for information
about setting functions in the fax screen. See "Application func-
tions overview" on page 7-5 for information about setting functions
in the scan setting or comm. setting screen.
7
Designate the destination.
–
See "Selecting one destination" on page 3-21 for designating the
destination.
8
Set the original document.
–
See "Placing originals on the platen glass" on page 3-8 for informa-
tion about setting the document.
9
Press [Start].
The FK-502 stores the document in memory before starting transmis-
sion.
!
Detail
To cancel transmission, see "Canceling transmission" on page 3-35.
If the destination is not ready to receive, your call will be redialed. For in-
formation about redialing, see "Manual redialing" on page 3-30.
If transmission fails, refer to "Cannot send messages" on page 5-3.
C450
7
7-9