Konica Minolta bizhub C450 Fax Manual page 106

3
4
Designate the time to start communication from the keypad.
– "Hour" and "minute" of the time to start communication are dis-
played in the 24-hour style, and entered in two digits.
– For example: To set the time to start communication at 9:07 p.m.,
input "21" and "07."
5
Press [OK].
You return to the comm. setting screen.
6
Press [OK].
– To release the setting, press [OFF] or [Cancel].
You return to the fax screen.
7
Set other functions if necessary.
– See "Setting transmission conditions" on page 3-11 for information
about setting functions in the fax screen. See "Opening the scan
setting screen and comm. setting screen" on page 7-3 for informa-
tion about setting functions in the fax application screen.
8
Designate the destination(s).
– For details, refer to "Selecting one destination" on page 3-21.
9
Set the original document.
– For details, refer to "Placing originals on the platen glass" on
page 3-8.
10
Press [Start].
The FK-502 reads the document and holds it in memory until the spec-
ified time when transmission starts.
3-48
Transmission
C450