Cleaning The Computer; Moving The Computer - Toshiba Satellite A200 seriers User Manual

If an external display will not be connected next time you use your computer,
you should cancel any extended desktop or clone display settings before
shutting down your computer.
Clone display settings are those where more than one device has been
selected and is simultaneously applicable.

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust
and use care with liquids around the computer.
■
Be careful not to spill liquids into the computer. If the computer does
get wet, turn the power off immediately and let the computer dry
completely before you turn it on again.
■
Clean the computer using a slightly damp (with water) cloth. You can
use glass cleaner on the display. Spray a small amount of cleaner on a
soft, clean cloth and wipe the screen gently with the cloth.
Never spray cleaner directly onto the computer or let liquid run into any part
of it. Never use harsh or caustic chemical products to clean the computer.

Moving the computer

The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.
■
Make sure all disk activity has ended before moving the computer.
Check the Built-in Hard Disk Drive and optical disc drive indicators
on the computer.
■
If a disk is in the disk drive, remove it.
■
If a disc is in the optical disc drive, remove it. Also make sure the optical
disc drive drawer is securely closed.
■
Turn off the power to the computer.
■
Disconnect all peripherals before moving the computer.
■
Close the display. Do not pick up the computer by its display panel or
back (where the interface ports are located).
■
Close all port covers.
■
Disconnect the AC adapter if it is connected.
■
Use the carrying case when transporting the computer.
Satellite A200/Satellite Pro A200
Operating Basics
4-29