Harman Kardon OMNI 10 Owner's Manual

Harman Kardon OMNI 10 Owner's Manual

Wireless hd audio system
Hide thumbs Also See for OMNI 10:

Advertisement

OMNI 10
OMNI 20
ADAPT
OWNER'S MANUAL
EN/

Advertisement

Table of Contents
loading

Summary of Contents for Harman Kardon OMNI 10

  • Page 1 OMNI 10 OMNI 20 ADAPT OWNER’S MANUAL...
  • Page 2: Table Of Contents

    Setting up Wi-Fi – iOS® Setting up Wi-Fi – Android™ Room setup Set up stereo pair Place your Speakers Operating your omni 10, omni 20, adapt Wi-Fi streaming via the Harman Kardon Controller app Controlling the Volume Muting the Sound...
  • Page 4: Introduction

    We hope you enjoy your new Harman Kardon Wireless HD Audio System product and that you’ll consider extending our solution throughout your home.
  • Page 5: Supplied Accessories

    SUPPLIED ACCESSORIES The following accessory items are supplied with your product. If any of these items are missing, please contact your Harman Kardon dealer or Harman Kardon customer service at www.harmankardon.com/wireless. Omni 10 Quick Start-up Guide AC power adapter Warranty card...
  • Page 6: Important Safety Information

    Verify Line Voltage Before Use The Omni 10 and Omni 20 have been designed for use with 100-240 volt, 50/60 Hz AC current. Connection to a line voltage other than that for which your product is intended can create a safety and fire hazard and may damage the unit.
  • Page 7 Do Not Open the Cabinet There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your warranty. If water or any metal object such as a paperclip, wire or staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service center.
  • Page 8: Top And Button Controls

    TOP AND BUTTON CONTROLS Omni 10 Omni 20...
  • Page 9: Bottom And Button Controls

    BOTTOM AND BUTTON CONTROLS Omni 10 Omni 20...
  • Page 10: Top, Bottom And Button Controls

    TOP, BOTTOM AND BUTTON CONTROLS Adapt...
  • Page 11: Top Panel Controls

    Link button will pull the same audio content to this product. Pressing the Link button for 3 seconds will enable Party Mode, which plays the same audio on every Harman Kardon wireless product on your home network (see Party Mode, page 37).
  • Page 12: Bottom Panel Controls

    BOTTOM PANEL CONTROLS This button connects to your home network. See the WPS section on page 25 for more information. Reset A short press of the button will reset the product to Wi-Fi setup mode. A long press for 5 seconds will reset your product to factory default settings.
  • Page 13: Connections

    CONNECTIONS Omni 10 Omni 20 Connect the supplied AC/DC power pack cable Connect the supplied AC power cable to this to this input. input. You can connect an analog audio device to the speaker via a 3.5 mm Aux cable.
  • Page 14 Adapt Connect the supplied USB cable to this input. You can connect an analog audio device to Connect speakers or an amplifier here via a 3.5 the Adapt via a 3.5 mm stereo cable. mm stereo cable. This is the only way to listen to audio with an Adapt.
  • Page 15: Setting Up Wi-Fi - Ios

    SETTING UP WI-FI – iOS® Using the Harman Kardon Controller App (iOS®) Download the Harman Kardon Controller app from iTunes App Store for compatible Apple products. Open the app by tapping the icon. Harman Kardon Controller app icon...
  • Page 16 To begin setting up your product, select the ‘Set up products’ button. Select ‘Add a new product’ to set up an Omni speaker or Adapt.
  • Page 17 Select ‘Manual setup’. (Note: WPS setup is covered in a separate section on page 25) Follow the on-screen instructions. First connect your product to power and turn it on. Wait several seconds for the unit to power on completely, then press and hold the ‘Reset’...
  • Page 18 Now leave the app and open the iOS® settings menu. Under Wi-Fi settings, find the product’s network and select it to connect. The network name starts with Omni 10_Setup, Omni 20_Setup, or Adapt_Setup. After connecting to the product network, return to the Harman Kardon Controller app.
  • Page 19 Once connected to the product network, return to the Harman Kardon Controller app. After returning to the Harman Kardon Controller app, select your home network from the drop- down list of available networks.
  • Page 20 Select the blank line and type in the password for your home network. When you are finished select the ‘Done’ button. If there is no password required, the password tab will appear gray. Select the ‘Done’ button to proceed. Note: WEP, WPA2 TKIP, and WPA2 AES security protocols are supported.
  • Page 21 Your product is now connected to Wi-Fi and ready for use. To set up another product, tap the ‘Set up another product’ button and follow the instructions. If you have finished, tap the ‘Done’ button on the upper right hand corner. This will take you back to the app home screen.
  • Page 22 Normally, the Harman Kardon Controller app can automatically detect if your product has joined the network. If it doesn’t detect that your product has joined, there may be a problem. If the Link button has stopped pulsing and is now solid white, then make sure your iOS®...
  • Page 23: Setting Up Wi-Fi - Android

    SETTING UP WI-FI – Android™ Using the Harman Kardon Controller App (Android™) Download the Harman Kardon Controller app from Google Play onto your compatible Android™- powered smartphones and tablets. To begin, open the Harman Kardon Controller app.
  • Page 24 To begin setting up your product, tap the ‘+’ button. Select ‘Add a new product’ to set up a new Omni speaker or Adapt.
  • Page 25 Follow the on-screen instructions. First connect your product to power and turn it on. Wait several seconds for the unit to power on completely, then press and hold the ‘Reset’ button on the bottom panel of the unit for 5 seconds. The Link button LED will flash quickly for several seconds, then begin to pulse slowly.
  • Page 26 Select your home network from the drop down list of available networks, then select the blank line and type in the password for your home network. When you are finished, select the ‘Done’ button. Note: WEP, WPA2 TKIP, and WPA2 AES security protocols are supported.
  • Page 27 Your product is now connected to Wi-Fi and ready for use. To set up another product, tap the ‘Set up another product’ button and follow the instructions. If you have finished, tap ‘Done’ in the upper right hand corner. This will take you back to the app home screen.
  • Page 28: Wps

    To connect to your home network via WPS-PBC mode: Press the WPS button on your router. Within one minute, press the WPS button on the Omni 10, Omni 20, or Adapt for less than two seconds. The Link button LED will quickly flash for up to one minute. Once the LED stops flashing and turns solid white, your product is connected to your home network.
  • Page 29: Room Setup

    ROOM SETUP Rooms are a convenient way to permanently group multiple speakers into a single playback zone, or to give speakers a meaningful name. Single products or pairs of products can be grouped into individual rooms. To set up a room, select the ‘Set up products’...
  • Page 30 Next, determine which type of room you want to set up. ‘Stand alone’ rooms consist of a single product, while ‘Stereo pair’ rooms consist of two products. Stereo pairs must include two products of the same type, i.e. two Omni 10s, two Omni 20s, or one Adapt.
  • Page 31 After selecting a room type, a list of available products will be displayed at the bottom of the screen. To set up a ‘Stand alone’ room, select one of these products. Note: If at any point your speaker loses its connection to the network go through the steps previously shown and tap the ‘Refresh signal strength’...
  • Page 32 From now on, the configured rooms will appear for selection on the side bar of the app’s home screen instead of individual products. When you stream music to a room, all speakers in that room will play together.
  • Page 33: Set Up Stereo Pair

    SET UP STEREO PAIR To set up a ‘Stereo pair’, two products must be selected as the left and right channels respectively. To begin, select L and then select a product from the bottom of the screen. Then select R, and select the other product from the bottom of the screen.
  • Page 34 Next, you must select one of the products to as Master. The Master product is important, so select whichever product you have easier physical access to, if any. The product in a ‘Stereo pair’ that is not the Master will have its Bluetooth® and Aux inputs disabled, and the LED on its outer ring will not illuminate.
  • Page 35: Place Your Speakers

    PLACE YOUR SPEAKERS Place the speaker on a firm and level surface. Make sure that the surface and any mounting hardware can support the Omni 10 or Omni 20’s weight. • Do not place the speaker directly on a carpeted surface.
  • Page 36: Operating Your Omni 10, Omni 20, Adapt

    OPERATING YOUR OMNI 10, OMNI 20, ADAPT Wi-Fi streaming via the Harman Kardon Controller app The Harman Kardon Controller app provides an easy-to-use interface for streaming all your music to your system. All your local device music content will be displayed on the home screen. The sidebar on the right offers selection and control of rooms and speakers.
  • Page 37 selection. When you tap a song, the song’s album artwork will fly to the selected room and begin playback immediately. Beside each song, there is an icon featuring three dots. Select this for additional playback queue options: Play now: Stop playback of the current song (if any) and begin playback of this song.
  • Page 38: Controlling The Volume

    Muting the Sound There are two ways to control the volume on the Omni 10 and the Omni 20. The first can be done by directly pressing the + button to turn the volume up or the – button to turn the volume down on the top controls of the speaker.
  • Page 39: Linking Rooms Or Speakers

    Linking Rooms or Speakers One of the key features of the Harman Kardon Wireless HD Audio System is the ability to easily send music around your home. This is accomplished by linking different products or rooms together. To link rooms or individual products together...
  • Page 40: Party Mode

    Party mode instantly groups all the products in your home together, playing the same music on every speaker. To enable Party mode from the Harman Kardon Controller app, begin streaming music to one group, room, or product and then tap the ‘Party Mode’...
  • Page 41: Using Third Party Apps Via Bluetooth

    Navigate to your phone or tablet’s Bluetooth® also remove individual rooms or products from settings menu, and select Omni 10, Omni 20, or the Party mode streaming group by using the Adapt to pair and connect. You only need to pair group button on the sidebar (see Linking rooms once with each phone or tablet .
  • Page 42: Aux-In

    Aux-in The Omni 10, Omni 20, and Adapt are each equipped with a two-channel analog audio input for playback of local analog sources. If two Omni 10s or Omni 20s are paired as a stereo pair, audio from the master speaker will be automatically sent to the other.
  • Page 43: Using The Link Button

    Link button for 3 seconds will enable of your product, go to the product settings page Party Mode, sending the same music to all the in the Harman Kardon Controller app. To access products in your house. the settings page, select any room or product from the right-hand sidebar.
  • Page 44: Standby

    Standby Omni 10 To conserve electricity, the Omni 10, Omni 20, or Adapt will automatically enter Standby mode after 10 minutes, if no audio is playing and no buttons are pressed. The Link button LED will turn amber, and the amplifiers will turn off. Wi-Fi, Bluetooth®, and Aux-in will continue to be monitored during Standby mode.
  • Page 45: Troubleshooting

    TROUBLESHOOTING If you are experiencing a problem not found in this section, please see the FAQs in the product sup- port section of www.harmankardon.com/wireless. Symptom Cause Solution Unit does not function Power cord is not connected Ensure that the power cord is plugged into a live power outlet Check if the power outlet is...
  • Page 46 Symptom Cause Solution Unit does not respond to the Heavy interference on the Reduce downloading or video Harman Kardon Controller app network streaming on your network Unit is frozen Power cycle your unit Restart the app Refer to www.harmankardon. com/wireless...
  • Page 47: Specifications

    SPECIFICATIONS • Model Name: HK OMNI 10 • Transducers: 1 x 90 mm woofer, 1 x 35 mm tweeter • Rated power: 1 x 25 W for woofer; 1 x 25 W for tweeter • Frequency response: 52~20 kHz -6 dB •...
  • Page 48 • 2.4 G Wi-Fi transmitter frequency range: 2412 − 2472 MHz (2.4 GHz ISM Band, USA 11 Channels, Europe and others 13 Channels) • 2.4 G Wi-Fi transmitter power: <20 dBm (EIRP) • 2.4 G Wi-Fi modulation: OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM •...
  • Page 49 8500 Balboa Boulevard, Northridge, CA 91329 USA www.harmankardon.com © 2014 HARMAN International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
  • Page 51 O M N I 1 0...
  • Page 52 Harman Kardon Omni 10 -laitteen asetukset ja hallita sitä. Harman Kardon Controller Загрузите приложение Harman Kardon Controller, чтобы настроить свой продукт Harman Kardon Omni 10 и управлять им. Hämta appen Harman Kardon Controller för att ställa in och styra din Harman Kardon Omni 10.
  • Page 53 Wi-Fi streaming via Harman Kardon Controller app Song ARTIST Genre Album Blinking Status Wi-Fi connected Wi-Fi streaming Bluetooth® HK OMNI 10 Blinking HK OMNI 10 Status Pairing mode Connected Streaming AUX input source Blinking Status Aux active System idle Auto standby (15 minutes)
  • Page 54 Komplet betjeningsvejledning Panduan pengguna keseluruhan Model Name: HK OMNI 10 Nom de modèle : HK OMNI 10 Transducers: 1 x 90mm woofer, 1 x 35mm tweeter Transducteurs : 1 x 90 mm graves, 1 x 35 mm aigus Rated power: 1 x 25W for woofer; 1 x 25W for tweeter...
  • Page 55 Mallin nimi: HK OMNI 10 Название модели: HK OMNI 10 Преобразователи: 1 низкочастотный динамик 90 мм, Muuntimet: 1 x 90 mm:n alibassokaiutin, 1 x 35 mm:n diskanttikaiutin 1 высокочастотный динамик 35 мм Nimellisottoteho: 1 x 25 W alibassokaiuttimelle; 1 x 25 W diskanttikaiuttimelle Номинальная...
  • Page 56 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. This mark certifies that this product is compliant with the BLACKFIRE ALLIANCE Standard. BLACKFIRE Please refer to WWW.BLACKFIREALLIANCE.COM for more information.
  • Page 65 Wireless room-filling sound at the touch of a button. Features Wireless audio in every room The Harman Kardon OMNI 10 is a wireless, truly HD audio system. It fills your room with crisp sound thanks to Harman’s expertise in Listen to different music in each room audio technology.
  • Page 66 8500 Balboa Boulevard, Northridge, CA 91329 USA © 2014 HARMAN International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. The Bluetooth® word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated, is under license.

This manual is also suitable for:

Omni 20AdaptOmni 10 adaptOmni 20 adapt

Table of Contents