Operating Elements; Placing; Before Taking Into Use; Adjusting The Browning Level - Silvercrest KH 1126 Operating Instructions Manual

Attention:
In the event of a malfunction and when cleaning the
appliance, remove the power plug from the wall socket.
Risk of electric shock!
• Loosen jammed slices of bread with a blunt wooden
object (e.g. a wooden spatula or spoon).
Do NOT touch the heater elements.
• Differences in bread sorts, moisture and the thickness
of individual slices influence the browning of the
toast. Therefore the bread for toasting should
be kept in sealed packaging until required.

Operating Elements

q
Bread roll holder
w
Toaster slots
e Operating button
r
Toasting dial
(for infinitely adjustable toasting-time electronics)
t
Button for the thaw function
y
Button for the warming function
u
Stop button for interrupting the toasting process
i
Crumb tray
o
Bread-roll attachment button

Placing

• Unwrap the power cable from the cable winder
in the underside of the appliance.
• Pass the cable through one of the two cable guide
on the underside of the appliance.
This will prevent jamming during usage.
• Place the toaster on a dry and level surface.

Before taking into use

Then heat the appliance up at least five times at the
maximum setting without the insertion of bread slices.
For details on cleaning the appliance read the section
»Cleaning and Care«.
Please take note:
The operating button
cable is connected to a power socket.
With the first usage a slight smell can arise (minimal
smoke development is also possible). This is normal
and dissipates after a short time. Provide for sufficient
ventilation.

Adjusting the browning level

The desired level of browning, from "light" (1) to
"dark" (7) can be adjusted infinitely with the browning
r
regulator of the toasting time electronics.
Take note that, subject to the demand made on
the toaster, the level of browning can vary
somewhat with an unvarying adjustment of the
browning regulator
slices inserted, the higher is the browning level.
Thus, if you are not intending to toast many slices,
always adjust the browning regulator
lower.
- 3 -
e
only engages when the power
r
! The less the number of
r
a little