5. Awiring diagram (Figure 24) has been provided to show the
connections between the water heater and the power supply.
Two Wire Connection
Diagrams: is the most common
requiring you to simply connect red to red, black to black,
and the ground wire to the green ground screw in the
junction box of the water heater.
7. The water heater must be electrically
installer. A green ground screw has been provided on the
water heater's junction
box. Connect ground wire to this
8. Replace the wiring junction cover using the screw provided.
6. Use wire nuts and connect the power supply wiring to the
wires inside the water heater's junction box.