Playback - Philips Voice Tracer User Manual

6 Playback

6.1 Selecting a recording
1
In stop mode (start-up screen), press a to select the desired
folder for the recording.
X The following symbols will be displayed, depending on the
selected folder: u, v, w, x – internal memory.
2
Press b while the device is stopped.
The position indicator jumps to the start of the next file.
X
3
Press h while the device is stopped.
X The position indicator jumps to the start of the preceding
recording.
6.2 Playing a recording back
1
Select the required file as described.
2
Press e to playback the selected file.
X The record/play indicator will light green. During playback,
the time indication for the recording is shown on the display.
3
Press the + / – buttons to adjust the volume.
4
Press the e key to pause playback.
The playback will stop and the green LED will start blinking.
X
Table of contents
5
Press e to continue playback from the previous position.
6
Press the j key to stop playback.
6.3 Adjusting playback speed
1
Press and hold the playback key e for at least 3 seconds during
playback.
2
Press + / – to set the desired playback speed.
3
Press the record key, g, to confirm.
6.4 Quick search
You can scan backward or forward in the current file at a fast speed.
This allows to find a specific part of the recording.
1
During playback press and hold one of the two navigation keys h
or b.
X The selected recording is searched for at high speed in either
forward or rewind mode.
2
Release the key
21
Playback