Section 3 Disassembly Instruction - Icom IC-FR5000 Service Manual

SECTION 3 DISASSEMBLY INSTRUCTION
1. Removing the front panel
q Unscrew 11 screws from the top cover. w Unscrew 7 screws from the front panel.
P 0
P 1
P 2
P 3
P 4
P 0
P 1
P 2
P 3
P 4
e Disconnect the cable from the MAIN UNIT assembly, and remove the front panel.
P 0
P 1
P 2
P 3
P 4
2. Removing the MAIN UNIT assembly
q Uscrew 5 screws which settles the MAIN UNIT assembly. w Turn the MAIN UNIT assembly upside down.
PWR
TX
RX
3. Removing the MAIN UNIT
q Unscrew 9 screws, and remove the cover.
(If you are going to install an optional unit, see page 4-1 for the installation.)
(To be continued to next page)
3 - 1