Changing Channels - Samsung 400 Series User Manual

If you want to reset this feature...
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ENTER button to select Plug & Play. For further details on setting up
options, refer to the pages 16~17.
The Plug & Play feature is only available in the TV.

Changing Channels

Using the Channel Buttons
1 Press the CH or CH
When you press the CH
sequence. You will see all the channels that the TV has memorized.
(The TV must have memorized at least three channels). You will not see
channels that were either erased or not memorized. See pages 20-21 to
memorize channels.
Using the Number Buttons
1 Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
The TV will change channels when you press the second number.
For quick channel change, press the number buttons, then press the ENTER
button.
Using the "-" Button
The " " button is used to select stations that broadcast a digital signal.
1 For example, for Channel 7-1, press 7, then
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the ENTER
button.
Using the PRE-CH Button to select the Previous Channel
Use the number buttons to quickly tune to any channel.
1 Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel.
Then use the PRE-CH button to quickly alternate between them.
button to change channels.
or CH button, the TV changes channels in
, then 1.
English - 18
T V Setup
Plug & Play
Language : English
Time
V-Chip
Caption
External Settings
Entertainment : Off
▼
More
Move
Enter Return
Plug & Play
i
Menu language, Store Demo,
Channels and Time will be set.
Start
Enter Return
►
►
►
►
►
►
►