UNITED OFFICE KH 4418 Operating Instructions Manual

Kompernass laminator user manual
Hide thumbs Also See for KH 4418:

Advertisement

6
Laminator
KH 4418
Laminator
Operating instructions
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH4418-01/10-V1

Advertisement

Table of Contents
loading

Summary of Contents for UNITED OFFICE KH 4418

  • Page 1 Laminator KH 4418 Laminator Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.: KH4418-01/10-V1...
  • Page 2 KH 4418...
  • Page 3: Table Of Contents

    Content 1. Intended use 2. Items supplied 3. Appliance description 4. Technical Data 5. Safety instructions 6. Suitable laminating pouches 7. Operating levels 8. Preparing for hot lamination 9. Preparing for cold lamination 10. Lamination process 11. Anti-Blocking Switch (ABS) 12.
  • Page 4: Intended Use

    The warranty does not provide compensation for damage caused by improper use of the appliance! 2. Items supplied 1x Laminator KH 4418 10x Laminating pouches DIN A4 for hot laminating (80 micron) 10x Laminating pouches DIN A5 for hot laminating...
  • Page 5: Safety Instructions

    Although the laminator satisfies all predominant safety norms and standards, errors can never be completely discounted - as with all electrical ap- pliances. Errors with the laminator can result in damage to the document being laminated. • Do NOT laminate any document which, together with the laminating pouch, would have a thickness of more than 1,0 mm.
  • Page 6: Suitable Laminating Pouches

    For cold lamination, use only laminating pouches that are expressly designated for cold lamination. Take note that the laminating pouches in- cluded with the laminator are intended exclusively for hot lamination. 7. Operating levels Position of Position of...
  • Page 7: Preparing For Hot Lamination

    ➩ Place the pouch thickness switch pouch thickness (80 or 125 micron). The laminator now heats itself up to the operating temperature. • The laminator has reached its operating tempe- rature as soon as the green LED indicator light "Ready"...
  • Page 8: Preparing For Cold Lamination

    After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember, the rollers inside the laminator will still be hot. These can damage the laminating pouch and the document to be laminated! ➩ Insert the pouch guide into the holes provided on the rear of the laminator.
  • Page 9: Anti-Blocking Switch (Abs)

    Ensure there is at least 30 cm of open space in front of the laminator. If you do not, the laminating pouch will not be completely ejected from the laminator after lamina- tion.
  • Page 10: Cleaning And Care

    Cleaning the interior of the appliance: With every lamination, contaminants are deposited on the rollers inside the laminator. Over time, this re- duces the performance of the laminator. You should therefore clean the rollers inside the laminator after use.
  • Page 11: Warranty And Service

    DES UK LTD Tel.: 0871 5000 700 (£ 0.10 / minute) e-mail: support.uk@kompernass.com Kompernass Service Ireland Tel: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. e-mail: support.ie@kompernass.com 17.

Table of Contents