Download  Print this page

Making The Electrical Connections - Husky 80-GALLON STATIONARY AIR COMPRESSOR Use And Care Manual

80-gallon stationary air compressor
Hide thumbs

Advertisement

Table of Contents
Installation - Electrical (continued)
3

Making the electrical connections

□ Use a blunt tool and hammer to carefully tap out the
stamped cover (1) at the top of the magnetic starter
box (2).
□ Loosen the ground screw (3). Loosen the terminal
screws (4).
□ Install the strain relief (5) on the magnetic starter (2). Do
not tighten the screws (6) or nut (7) of the strain relief (5)
on the power cord until wiring is complete.
□ Insert the bare wires [black, red, bare/green](8, 9, 10)
through the strain relief (5).
□ Attach the bare/green ground wire (10) fi rst to the ground
screw (3) on the magnetic starter body.
□ Install the line wires (8, 9) and tighten the terminal
screws (4).
7
9
4
15
Please contact 1-888-43-HUSKY for further assistance.
5
6
HUSKYTOOLS.COM
1
2
10
8
4
3

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Husky 80-GALLON STATIONARY AIR COMPRESSOR

This manual is also suitable for:

Tf291204