You can configure sound settings of your TV by using Sound Settings menu.
Configuring Sound Settings
Sound settings can be configured according to your
Press MENU button and select Sound by using Left
or Right button. Press OK button to view Sound
Operating Sound Settings Menu Items
• Press Up or Down button to highlight a menu item.
• Use Left or Right button to set an item.
• Press MENU button to exit.
Select Volume using Up or Down button and then use
Left or Right button to set volume level.
Equalizer (Only for speaker)
You can customize current sound mode settings. Select
the appropriate mode in accordance with the installation
location of the TV and adjust the equalizer on-screen as
desired. Press OK button to view equalizer submenu.
In equalizer menu, the preset can be changed to Music,
Movie, Speech, Flat, Classic and User. Press the
MENU button to return to the previous menu.
Note: Equalizer menu settings can be changed manually
only when the Equalizer Mode is in User.
Configuring Sound Settings
English - 28 -
Balance (Only for speaker)
This setting is used for emphasizing left or right speaker
• Press Left or Right button to change the level of the balance.
Balance level can be adjusted between -31 and +31.
This setting is used to set the sound output when
headphones are connected.
• Press Up or Down button to select Headphone.
• Press Right button to increase headphone volume level.
Press Left button to decrease headphone volume level.
Headphone volume level can be adjusted between 0
This setting is used to set the Sound Mode. Higlight
Sound Mode by using Up or Down button. Press Left
or Right button to set.
You can select Mono, Stereo, Dual I or Dual II mode,
only if the selected channel supports that mode.
Sometimes there can be large changes in volume
when switching from a DTV 5.1ch to a DTV 2ch, an
ATV channel, or an external input. Using the AVL
feature reduces these volume differences.
• Press Up or Down to highlight AVL. Press Left or Right
button to set AVL as On or Off.
Set this option as Lineout, when an external amplifier
is connected to the TV using the headphone jack. If
headphones are connected to the TV, set this option
Dynamic Bass is used to increase bass effect of the
TV set. Select Dynamic Bass using Up or Down
buttons and press Left or Right button to set.
In the Sound menu, press Up or Down to highlight
Surround Sound. Press Left or Right button to set
Surround Sound as On or Off.
This setting enables you to set Digital Out preference
as Compressed or PCM. You should set this feature
in accordance with the received broadcast's content.
Select Digital Out using Up or Down button and then
use Left or Right button to set.