Sony Handycam HDR-CX110 Operating Manual page 91

You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.
¦
Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.
1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
Tips
¼
See page 90 on recording and playing time.
When your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
Charging time
Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack
NP-FV50(supplied)
NP-FV70
NP-FV100
Times measured with the camcorder at 25 C (77 °F).
10 C to 30 C (50 °F to 86 °F) is recommended.
Charging time
155
195
390
US
13