Care And Cleaning; Maintenance Schedule - Husky HS518102 Use & Care Manual

Maintenance (continued)
7
Checking the air fi lter
□ Remove the nut (1).
□ Remove the air fi lter cover (2) from the air fi lter base (4).
□ Remove and inspect the air fi lter element (3).
□ If the air fi lter element is dirty, replace it. Install a new fi lter
element. If the air fi lter element is clean, reinstall it.
□ Reattach the air fi lter cover (2).
□ Reattach the nut (1). Do not overtighten the nut as this
maintenance process will be repeated regularly. The nut (1)
should be snug enough to hold the air fi lter cover (2) in
place.

MAINTENANCE SCHEDULE

WARNING: Disconnect, tag, and lock out the power
source, and then release all pressure from the system
before attempting to install, service, relocate, or perform
any maintenance.
Operation
Check Oil Level
Drain Tank
Check Air Filter
Check Safety Valve
Clean Unit
Check Belt Tension
Change Oil
IMPORTANT: Change oil after the fi rst fi fty (50) hours of
operation. Then perform oil changes every three (3) months.

Care and Cleaning

WARNING: Disconnect, tag, and lock out the power
source, and then release all pressure from the system
before attempting to install, service, relocate, or perform
any maintenance.
□ Keep all surfaces clear of debris and dirt.
□ Do not attempt to clean the unit while running. Turn off the unit, disconnect it from the mains, and allow the unit to cool down.
□ Check the air fi lter weekly to see if it needs to be cleaned. Remove the fi lter element. Use hot, soapy water to clean the fi lter and allow
the fi lter to dry before reinstalling and returning the unit to active duty. Replace a fi lter that cannot be cleaned.
4
Daily Weekly
X
X
X
X
21
Please contact 1-888-43-HUSKY for further assistance.
3 2
Monthly Every 3 Months
X
X
X
HUSKYTOOLS.COM
1