Controls And Functions - Yamaha CD-S2100 Owner's Manual

Controls and functions

■ Front panel (pages 6 to 9)
STANDBY/ON
OFF
1 2
1 STANDBY/ON, OFF switch
Turns on or off this unit.
STANDBY/ON (upper position): In this position,
you can select STANDBY or ON, using the p CD
key on the remote control.
OFF (lower position): The power of this unit is
turned off.
Notes
• When you turn on this unit, it will take a few seconds
before this unit can reproduce sound.
• If this unit is not operated for 30 minutes with no audio
signal detected, it goes to STANDBY mode (page 14).
• If you disconnect the power cable from the AC outlet and
connect it again when this unit is in STANDBY mode, the
power of the unit is turned on (page 20). If the unit is not to
be operated for a long time, set the STANDBY/ON, OFF
switch to OFF.
6
En
PURE DIRECT SOURCE LAYER
3 4 5 6
SA-CD HYBRID TRACK TOTAL REMAIN PROG SHUFFLE REPOFFSALL
LAYER
SA-CD CD DISC USB
7
2 STANDBY/ON indicator
Lit brightly: Shows that the power of the unit is ON.
In this condition, you can switch the unit to
STANDBY mode by pressing the p CD key on
the remote control.
Lit dimly: Shows that the unit is in STANDBY mode.
In this condition, you can switch the unit on by
pressing the p CD key on the remote control.
Off: Shows that the power of the unit is OFF. In this
condition, you can turn the power on only by
pressing the STANDBY/ON, OFF switch on the
front panel.
SOURCE
OPTICAL COAXIAL
8