Necessary Settings To The Dvd Player Before Operation; Using The Osd Menu; Language Settings - Silvercrest KH 6510 Operating Instructions Manual

KH6510_11_A4_V3_EN.qxd 24.08.2006
KH 6510/6511
8. Necessary settings to the DVD player before
operation
All possible settings on the DVD player can be administered
with the remote control via the so called "OnScreen display"
menu (in short "OSD Menu"). The OSD Menu will be super-
imposed on the television screen.
Before you use the DVD player for the first time for playback
of DVDs, VCDs/S-VCDs or Audio-/MP3-CDs you must imple-
ment a few settings via the OSD Menu. These settings are
dependent amongst others on...
• the language, in which you want the OSD Menu to be
displayed
• which TV standard corresponds to the television, to which
you want to connect the DVD player
• Which image format your television can display
In order to implement the necessary settings via the OSD
Menu...
• First insert the connecter plug of the DVD player's power
cord into a power socket.
• To turn the DVD player on press the "ON/OFF" button on
the front panel of the DVD player. If the DVD player is already
switched on but is in Standby Mode press the button
"Standby" on the remote control to switch the DVD player
on. Standby Mode is indicated by the red LED on the front
panel of the device.
The device will check to see if a disc is inserted.
The SilverCrest-Logo appears on the television screen:
• Firstly please familiarize yourself with the OSD Menu's
operation by means of the following brief introduction.
12:25 Uhr Seite 10
- 10 -

8.1. Using the OSD Menu

To summon the DVD player's OSD Menu...
• Press the "Setup" button on the remote control.
The OSD Menu with its menu options will appear on the
television screen:
The following menu options can be set:
Language, Video, Audio, Rating, and Misc.
• The control buttons
OSD Menu. To confirm a selection or input press the "OK"
button.
• To exit the selected OSD Menu option press the control
button , until the left Menu tab (Language, Video etc.)
is active. Select another Menu tab with the control buttons
and activate the OSD Menu option with the control
button .
• To exit the OSD Menu press the button "Setup" again.

8.2. Language Settings

You can preset the languages for the Menu-language, DVD-
Menu, Subtitles, Audio and DivX Subtitles functions. These
settings are valid for every DVD if the selected language is
present on the DVD.
- OSD Language: Here you set the language, in which the
OSD Menu will be displayed on the tele-
vision screen.
- DVD Menu: Here you set the language, in which the
DVD Menu will be displayed on the tele-
vision screen. Not all films contain a menu
on the DVD. If a menu is available then
it can only be shown in the language
that you set if this language is available
on the DVD. If the selected language is
not available then the DVD Menu will be
displayed in another language.
will move you through the