Installing the WLAN Card / WiGig Card
1.
Place the WLAN card into its slot on the computer.
2.
Tighten the screw to secure the WLAN card to the computer.
3.
Connect the WLAN cables to their connectors on the WLAN Card.
4.
Install the
base
cover.
5.
Follow the procedures in
Removing the WWAN Card
1.
Follow the procedures in
2.
Remove the
base
cover.
3.
Perform the following steps to remove the WWAN card:
a. Disconnect the WWAN cables from their connectors on the WWAN card [1].
b. Remove the screw that secures the WWAN card to the computer [2].
4.
Remove the WWAN card from the computer.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
25