Configuring The Server; Configuring The Onboard Sata Controller - Fujitsu PRIMERGY TX1330 M1 Operating Manual

Starting up and operation
– Power button override
The system can be switched off by pressing and holding down the On/Off
button (for approximately 4 - 5 seconds).
V
CAUTION!
There is a risk that data may be lost.
– iRMC S4
iRMC S4 offers various options for switching the server on and off, e.g. via
the Power On Off page of the iRMC S4 Web interface.
6.4

Configuring the server

This section contains information about configuring the server and installing the
operating system.
I
Make sure that the power saving functions are disabled in the Power
menu of the BIOS Setup during operation.
6.4.1

Configuring the onboard SATA controller

A SATA controller is integrated on the system board. You can configure the
onboard controller either before or during installation with the ServerView
Installation Manager. Using the ServerView Installation Manager is
recommended.
I
The controller has its own configuration utility. For further information,
refer to the "Embedded MegaRAID Software User's Guide" (on the
Fujitsu manuals server under x86 Servers - Expansion Cards - Storage
Adapters - LSI SAS / SCSI RAID Controllers).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.html
(for the EMEA market).
http://jp.fujitsu.com/platform/server/primergy/downloads/
(for the Japanese market).
74 Operating Manual
TX1330 M1