Scene Recall Midi Link - Yamaha Cascade PM5D Setup Manual

Cascade setup guide
Hide thumbs Also See for Cascade PM5D:
Table of Contents

Advertisement

■ Scene Recall MIDI Link

PM5D & DME64N CASCADE / Mode 2: Remote Control & One-way Audio: PM5D to DME64N
The SCENE RECALL LINK switch in
the DME CONTROL-SETUP screen
will enable PM5D to send a MIDI
message through the cascade
connection to recall a scene in the
DME, following the Program Change
table assignments.
You need to switch on PROGRAM
CHANGE Tx. (It doesn't matter about
the MIDI PORT selection, as it will use
the CASCADE IN/OUT ports
automatically.)
11/34
You need to switch on Program Change Rx. (It doesn't matter
about the MIDI PORT selection, as it will use the CASCADE
IN/OUT ports automatically.)
PM5D has a default Program Change assignment of 1-to-1, but
DME's Program Change table will need to be set up by the
user: assign any scene to any number. (Click 'All Assign' for a
quick set-up.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dme24nCascade dme64nDme64nDm 2000 version 2

Table of Contents