Setting Measurements Using the PC Application (Run Connect) (SF-710 only)
Set the distance or time to divide the
lap, and then click OK.
When registering multiple entries or
editing them, click the button and
When you have finished choosing
your settings, click OK.
When Standard is selected, your setting will be
repeated. Deselect Standard to customise your
Select the settings you want to write to
the device, and then click Write to
Settings are written to the device.
See the following pages to select the AT Lap settings, and
"Recording Laps Automatically (AT Lap
Function)" on page 54
"Measuring" on page 39