Download Print this page

Epson SF-710 User Manual: Setting Interval Conditions And Measuring

Gps sports monitor.
Hide thumbs

Advertisement

SF-710/510/310
User Manual
Setting interval conditions and
measuring
Note:
By using the PC application (Run Connect), you can setup
interval conditions from your computer.
When setting up from your computer, you can also
customise your sprint and recovery intervals (SF-710
only).
"Setting the Interval Function (SF-710 only)" on
U
page 102
Operation buttons
Setting interval conditions
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
"Specifying a GPS (GPS Positioning)" on
U
page 29
B
Displays the Measure set. menu.
Hold down B on the measurement screen.
Measure
C
Select Mode.
Use C/D to select, and then press A.
D
Select Interval.
Use C/D to select, and then press A.
E
Select an empty setting.
Use C/D to select, and then press A.
When this is already set, select one of SETTING
01 to 03. Check the set content, and then press
A.
F
Select Edit.
Use C/D to select, and then press A.
44

Advertisement

   Related Manuals for Epson SF-710

This manual also for:

Sf-510, Sf-310

Comments to this Manuals

Symbols: 0
Latest comments: