Looking after your device
❏ If the device is placed in the cradle when it is covered in water, sweat, or dirt, the contact points could corrode,
malfunction, or cause a communication failure.
❏ Do not perform button operations when it is wet; otherwise, a malfunction could occur.
After using the device, wash the contact points lightly with tap water, wipe away most of the water with a towel and so
on, and then let it dry naturally. Water, sweat, or dirt could cause the device to malfunction.
If charging or communicating becomes unstable, clean the contact points on the device and the cradle with a damp
Do not clean using organic solvents such as benzine, thinner, alcohol, or detergent. This could cause the product to
About the strap
If the strap gets soiled, wash it with water and wipe thoroughly with a dry cloth. This strap is made from polyurethane
and after years of use the colour may fade or it may lose its elasticity.
Heart rate monitor maintenance
❏ After exercising, take off the heart rate monitor and heart rate belt, dip them in water and wash.
❏ Also make sure that you wash the button sections and wipe off all moisture.
❏ Although you can wash the HR belt in a washing machine, make sure you place the belt in a net, and do not use a
❏ Do not iron, dry clean, or use a chlorine-based detergent on the HR belt.
❏ Wash the heart rate monitor carefully with water. Do not use a washing machine or a dryer.
❏ Dry the heart rate monitor and heart rate belt completely and store them separately.