Changing The Lap Screen - Epson Runsense SF-710 User Manual

Gps sports monitor
Hide thumbs Also See for Runsense SF-710:
Table of Contents

Advertisement

SF-710/510/310
User Manual
❏ When not performing GPS positioning
(Indoor mode: SF-710/SF-510 only):
Hold down C on the time screen.
"Indoor mode (SF-710/SF-510 only)"
U
on page 31
B
Display the Measure set. menu.
Hold down B on the measurement screen.
C
Select Screen.
Use C/D to select, and then press A.
D
Select Screen4.
Use C/D to select, and then press A.
Settings
E
Select Lap.
Use C/D to select, and then press A.
Screen Image is displayed.
After checking, press A and go to the following
step.
F
Complete the settings.
Hold down A.
The measurement screen is displayed.
Press A on the measurement screen to change the
screen, and then check if Screen4 has been
changed.
Note:
Hold down A on the measurement screen to display the
time screen.

Changing the Lap screen

The Lap screen is displayed when recording laps. Here
we will explain how to display Lap Pace in 1 Line for
demonstration purposes.
Operation buttons
125

Advertisement

Table of Contents
loading

This manual is also suitable for:

Runsense sf-510Runsense sf-310

Table of Contents