Changing The Measurement Screen - Epson Runsense SF-710 User Manual

SF-710/510/310 User Manual
Changing the measurement
screen
The setting method varies depending on the screen
pattern. See the explanations for each screen pattern.
"Setting 1 Line/2 Lines/3 Lines" on page 122
U
"Setting Pace&Graph/HR&Graph" on page 123
U
"Setting Lap/Target Pace/OFF" on page 124
U
Setting 1 Line/2 Lines/3 Lines
Here we will explain how to display Calories Burnt in
Screen4 using 1 Line.
Operation buttons
A
Display the measurement screen.
Use one of the following methods to display.
❏ When performing GPS positioning:
Press C on the time screen.
❏ When skipping GPS positioning:
Press C on the time screen, and then select
Skip on the GPS positioning screen.
"Skipping GPS positioning" on
U
page 30
❏ When not performing GPS positioning
(Indoor mode: SF-710/SF-510 only):
Hold down C on the time screen.
"Indoor mode (SF-710/SF-510 only)"
U
on page 31
Settings
B
Display the Measure set. menu.
Hold down B on the measurement screen.
C
Select Screen.
Use C/D to select, and then press A.
D
Select Screen4.
Use C/D to select, and then press A.
E
Select 1 Line.
Use C/D to select, and then press A.
Screen Image is displayed. Altitude is displayed
by default.
122