To control the satellite receiver or cable box with the remote
control, see "Using the Remote Control to Control Additional
Components" on Page 22.
USING THE SLEEP TIMER
You can set the sleep timer to turn off the receiver after a set
period of time.
to set the sleep timer to the desired
time ('& '& '& '&, (& (& (& (&, )& )& )& )&, *& *& *& *&, +& +& +& +&, ,& ,& ,& ,&, -& -& -& -&, .& .& .& .&, or /& /& /& /& minutes or OFF). When
the desired sleep time appears, let the sleep timer time out (do
again). The display dims when the sleep timer
To check the expired sleep time, press
remaining time appears. To continue the sleep time, let it time
out. To cancel the sleep timer, press
The receiver turns off when the selected time has expired.
N N N N o o o o t t t t e e e e : : : : To brighten the display while the sleep timer is on, press
on the receiver).
USING THE REMOTE CONTROL TO
CONTROL ADDITIONAL COMPONENTS
You can set your remote control to control other components
such as a VCR, TV, satellite receiver or cable box.
1. Turn on the component to be programmed.
2. Look up the brand and corresponding code(s) in the code
list (see "Manufacturer' s Codes" on Page 22).
3. While holding down the appropriate source button (
) on the remote control, use the number keys to
enter the first code from the code list.
4. Release the source button, then press
entered the correct code, the component turns off.
If the component does not turn off, repeat Steps 3 and 4
and use the next code (if applicable) listed for the brand of
your component until the component responds to the
5. Experiment with the remote control and your components
to see which buttons work. If only a few functions operate,
repeat Step 4 to see if another code operates more buttons.
N N N N o o o o t t t t e e e e s s s s : : : :
• To turn on or off the receiver when you select the VCR,
SAT, or TV function, press
• Once the manufacturer' s code for the TV is set,
can only be used in TV mode.
repeatedly until it
. If you have
C C C C a a a a u u u u t t t t i i i i o o o o n n n n s s s s : : : :
• This remote control might not operate on models of the
brands shown in the "Manufacturer' s Codes" on Pages 22-
• If batteries are removed from the battery compartment of
the remote, replace the batteries within 30 minutes or the
codes are lost. You must then re-enter all previously
• The buttons on the remote control may not work exactly
like the component' s corresponding buttons.
BELL & HOWELL
104, 106, 108
104, 106, 108, 138, 205, 271
112, 113, 138
104, 106, 115, 185, 205, 262, 271
104, 105, 106, 117, 118, 271
104, 106, 271
103, 104, 106, 119, 122
104, 106, 112, 124, 125, 126, 127, 128,
129, 130, 131, 132, 134, 135, 136, 138,
139, 141, 142, 146, 262, 271, 279
148, 149, 151, 262, 280