Download  Print this page

Checking The Programme; Changing A Programme - Sanyo MCD-UB575M Instruction Manual

Cd portable radio cassette recorder
Hide thumbs

Advertisement

MP3 CD Play
1. Load the MP3 CD. (See page 16.)
The total number of files of the MP3 CD appears
on the display.
2. Press the PLAY/PAUSE i button to start
playback.
3. Press the MEMORY/FOLDER button,
"FOLDER" blinks on the display, then press
the f/FILE- or FILE+/e button (or the
FOLDER- or FOLDER + button on the remote
controller) to select the desired folder.
4. When the first file number of selected folder
appears, press the f/FILE- or FILE+/e
button to select a desired file.
5. Press the PLAY/PAUSE i button to start
playback.
MP3
6. Press the STOP n button at any time to stop
the playback.
Note:
-
If there is no music data, "no" appears.
-
Only select the folder in playing mode.
PROGRAMMED PLAY
Up to 32 files on a disc can be programmed for
play in any order.
-
To begin the programming procedure, set
FUNCTION switch to "CD/USB" first.
-
The same file can be programmed more than
once.
-
Load a disc that you want to programme before
starting programmed play.
1. Press the STOP n button if necessary.
2. Press the MEMORY/FOLDER button, the "P01"
a n d " M E M O R Y " a p p e a r b r i e f l y t h e n
"
" appears and "MEMORY" blinks.
3. Select a file by using the f/FILE- or FILE+/e
button (or the FOLDER- or FOLDER + button
on the remote control).
19
575PAEn.indd 19
MEMORY
MEMORY
4. Press the MEMORY/FOLDER button, the
"P02" and "MEMORY" appear briefly, then
"
" appears and "MEMORY" blinks.
5. Repeat steps 3-4 to programme additional
tracks.
6. Press the PLAY/PAUSE i button to
start playback. "P01" appears briefly, then
first programmed file appears and "MEMO-
RY" remains lit.
MEMORY
MP3
7. Press the STOP n button to stop programme
playback at any time.
To cancel programmed play, press the STOP n
button twice during play.

Checking the programme

In stop mode when MEMORY remains lit, press
the MEMORY/FOLDER button repeatedly,
the programmed details sequentially appear
on the display.

Changing a programme

To add a new file to a programme:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until last programme
number is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
To change a file:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until the file number to
be replaced is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
Note:
Programmed details cannot be partially deleted
or inserted.
2006.12.5 11:04:20 AM

Advertisement

loading

  Also See for Sanyo MCD-UB575M