Test Run Operation - Mitsubishi Electric PUHZ-FRP71VHA Service Manual

10-2-2. Test run for wired remote controller <PAR-31MAA>
Select "Service" from the Main menu, and press the
1
Select "Test run" with the F1 or F2 button, and press the
Select "Test run" with the F1 or F2 button, and press the
2

Test run operation

Press the F1 button to go through the operation modes in the order of "Cool
and Heat".
Cool mode: Check the cold air blow off.
Heat mode: Check the heat blow off.
Press the button and open the Vane setting screen.
Auto vane check
Check the auto vane with the F1
* Check the operation of the outdoor unit's fan.
Press the button to return to "Test run operation".
Press the button.
When the test run is completed, the "Test run menu" screen will appear.
* The test run will automatically stop after two hours.
OCH544
button.
F2 buttons.
button.
button.
18
MENU RETURN SELECT ON/OFF
Function buttons
F1 F2 F3 F4
S e v r c i e m e n u
Test run
Input maintenance info.
Function setting
Check
Self check
M a n i m e n : u
C u s r r o
Test run menu
Test run
Drain pump test run
Service menu:
Cursor
Test run Remain
Pipe
Cool Auto
Switch disp.
Mode Fan
Remain
Vane