DeLonghi CPC206AU Operating And Installation Manual page 6

OPERATION AND DISPLAY
1. Manual switch
This is used to start the appliance if the remote con-
trol is not working.*
2. Heating indicator
This comes on when the appliance is in heating mode.
3. Cooling indicator
This comes on when the appliance is in cooling
mode.
The shape and the position of the switches and
indicators may change according to the model,
however their functions remain the same.
Power on when grill open.
*This operation must be carried out by spe-
cialist technicians.
SINGLE SPLIT
AUTO
TEST
RUN
STOP
4. Operation indicator
This comes on when the appliance is operating.
5. Signal receiver
Receives the signals from the remote control.
1
2
3
4
5
English 11/2002 5