When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the POWERP button. Plug & Play is available only when the Source is set to TV.
Before turning on the TV, make sure the antenna cable is connected (p. 6).
To return to the previous step, press the Red button.
Selecting a language
(depending on the
Demo or Home Use
Selecting a Country/
Area (depending on
Setting the Clock
Selecting a channel
Network Settings or
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0."
If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to "0-0-0-0":
Downloaded From TV-Manual.com Manuals
Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
Select the Home Use mode. Store Demo mode is for retail
To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold
Store Demo is only for shop display. If you select it, several
functions are not able to use. Please select Home Use when you
watch at home.
Press the ▲ or ▼ button, then press the ENTERE button. Select the
After selecting the Country in the Country menu, some models may
proceed with an additional option to setup the pin number.
When you input the PIN number, "0-0-0-0" is not available.
Press the ENTERE button. Select the appropriate area by pressing the ▲ or ▼
button. Press the ENTERE button to confirm your choice.
Set the Clock Mode automatically or manually.
Auto: Allows you to select a time zone.
Press the ▲ or ▼ button to highlight the time zone for your local area. Press
the ENTERE button. (depending on the country)
Manual: Allows you to manually set the current date and time.
Select the channel source to memorise among Digital & Analogue / Digital /
If you want to watch a broadcast program, select Enjoy your TV. You can set
up the Network connection. If you want to set up the network, select Network
Settings. The Network Settings screen will appear. For more detailed information,
refer to "Network Connection" in the e-Manual.
→ System) again at home although you did in shop.
→ 8 → 2 → 4 →
English - 7
for 5 sec.