Setting Up The Satellite Dish Antenna - Sony SAT-A55P Service Manual

ALT AUDIO JUMP
GUIDE
FAVORITE INDEX CATEGORY
VOL CH
MENU
EXIT
VTR3 2 DVD AMP RM-Y802
CODE SET
SATELLITE
RECEIVER
RM-Y802
Remote Control
Antenna Type
Select Round, Oval 2-Sat or Oval 3-Sat
depending on your Satellite Dish
Antenna type.
Transponder
Lets you select the transponder from
which the Satellite Dish Antenna
receives its signal.
You do not need to change this setting
unless instructed by your service
provider.
Antenna Location
Lets you find out the direction of the
satellite from your location.
Azimuth, Elevation and Tilt
Shows how to aim your Satellite Dish
Antenna depending on your antenna
type and location.
Status
"Locked" shows that your Satellite
Dish Antenna is receiving a signal.
"Unlocked" shows that a signal is not
being received.
Note
Most areas of the United States will
not receive a peak signal strength of
100. Although there is no picture
quality difference between a signal
strength of 60 and 100, a higher
signal strength will limit any
negative effects in degraded
conditions such as rain or snow.
Setting Up the Satellite Dish
Antenna
This display helps you aim your Satellite Dish Antenna to get the
strongest signal.
For complete information on installation of your Satellite Dish Antenna,
refer to the Satellite Dish Antenna Installation Instructions.
1 Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
MENU
2
Highlight and select "Antenna".
The Antenna display appears.
Return
Closes the Antenna display to
show the Main Menu.
Help
Opens information about the
Antenna display.
Signal Strength Meter
Shows the current and peak
levels of the signal strength.
®
SignalSeeker Indicator
When using a Round antenna,
shows that your Satellite Dish
Antenna's SignalSeeker
indicator can be used.
23