Panasonic KX-TDA100D Installation Manual page 124

2.9.1 Connection of Peripherals
Pin Assignments
1
8
Pager
Up to 2 paging devices (user-supplied) can be connected to the PBX.
CAUTION
External Paging Jacks are SELV ports and should only be connected to approved SELV devices, or in
Australia, via the Line Isolation Unit with the Telecommunications Compliance Label.
Pin Assignments
1
8
PC/Printer (via RS-232C)
The PBX is equipped with an RS-232C interface. This interface provides communication between the PBX
and the user-supplied devices such as PC or line printers. The RS-232C port is used for system programming,
SMDR, diagnostics and external system database storage (save/load) functions.
CAUTION
To protect the system, keep the following in mind:
1.
Make sure that both connector cases (frame ground) of the RS-232C cross cable (shielded cable) are
conductive. If they are not conductive, make sure that both connector cases of the cable are firmly
connected.
124 Installation Manual
No. Signal Name
1 MOH1
2 MOH1
3 PAG2
4 PAG1
5 PAG1
6 PAG2
7 MOH2
8 MOH2
No. Signal Name
1 MOH1
2 MOH1
3 PAG2
4 PAG1
5 PAG1
6 PAG2
7 MOH2
8 MOH2
Level [V] Function
Nonpolar Music on Hold Jack: Port 1
Nonpolar Music on Hold Jack: Port 1
Nonpolar External Paging Jack: Port 2
Nonpolar External Paging Jack: Port 1
Nonpolar External Paging Jack: Port 1
Nonpolar External Paging Jack: Port 2
Nonpolar Music on Hold Jack: Port 2
Nonpolar Music on Hold Jack: Port 2
Level [V] Function
Nonpolar Music on Hold Jack: Port 1
Nonpolar Music on Hold Jack: Port 1
Nonpolar External Paging Jack: Port 2
Nonpolar External Paging Jack: Port 1
Nonpolar External Paging Jack: Port 1
Nonpolar External Paging Jack: Port 2
Nonpolar Music on Hold Jack: Port 2
Nonpolar Music on Hold Jack: Port 2