Philips DCM276 User Manual page 19

Micro hi-fi system
Hide thumbs Also See for DCM276:
Table of Contents


Remote control does not work
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities
(+/– signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
device has exceeded a certain limit. This
phenomenon is not a malfunction.
USB device not supported
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
Increase the distance between the unit
and your TV or VCR.
Fully extend and adjust the FM antenna.
Clock/timer setting erased
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
Timer does not work
Set the clock correctly.
Switch on the timer.
Downloaded From Philips Manuals


Table of Contents

Subscribe to Our Youtube Channel

Table of Contents