Other Features; Set The Alarm Timer; Set The Sleep Timer; Play From An External Device - Philips DCM276 User Manual

Micro hi-fi system
Hide thumbs Also See for DCM276:
Table of Contents

Advertisement

7 Other features

Set the alarm timer

This unit can be used as an alarm clock. The
disc/radio/USB/iPod is activated to play at a
preset time.
Note
Ensure that you have set the clock correctly.
1
Press
to switch to standby mode.
2
Press and hold SLEEP/TIMER for more
than two seconds.
»
A prompt to select the source is
displayed.
3
Press CD, or TUNER, USB or iPod to
select a source.
4
Press SLEEP/TIMER
»
The clock digits are displayed.
»
The hour digits begin to blink.
5
Press
/
6
Press SLEEP/TIMER
»
The minute digits begin to blink.
7
Press
/
»
The timer is set and activated.
»
is displayed.
16
EN
Downloaded From Disc-Player.com Philips Manuals
to set the hour.
to set the minute.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
»
When sleep timer is activated,
displayed.
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until
[OFF] (off) is displayed.
»
When sleep timer is deactivated,
disappears on the display.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press USB/MP3 LINK to select the MP3
link source.
2
Connect the supplied MP3 link cable to:
the MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
is

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents