Connecting To A Wireless Router; Wps Button - D-Link mydlink DSP-W215 User Manual

Section 4 - Connecting a Wireless Client

Connecting to a Wireless Router

WPS (Wi-Fi Protected Setup) is a simple and secure way to connect your DSP-W215 to your network. Please refer to the user
manual for the wireless router you want to connect to make sure you understand how to enable WPS. Once you know, follow
the steps below:
Step 1 - Press the WPS button on the DSP-W215 for about 1 second. The LED on the device will start to blink.
Step 2 - Within 120 seconds, press the WPS button on your wireless device.
Step 3 - Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and
your wireless connection will be secured with WPA2.
D-Link DSP-W215 User Manual

WPS Button

WPS Button
25