Assembly; Handle Assembly - Bissell 1306 SERIES User Manual

Assembly

No tools required for assembly.

Handle assembly

1. Press the handle adjustment lever and slide
the handle into the vacuum base
1.
2.
NOTE: The handle has two height settings.
To lower or raise the handle, push the handle
height adjustment lever and slide the handle up
or down until it locks into the desired place. (2.)
3. Attach the lower cord wrap to the lower
back of unit by snapping in place.
4. Attach the extra reach stair hose to the
back of the unit.
NOTE: The handle of your vacuum can also
be used as an extension wand. Follow
instructions on page 7 to attach the extra
reach stair hose and attachment.
3. 4.
www.BISSELL.com
5