Listening To The Radio; Presetting Stations - Samsung HT-DM550 Instruction Manual

Digital
Hide thumbs Also See for HT-DM550:
Table of Contents

Advertisement

Listening to the Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the
automatic or manual tuning operation.
1
Remote
Press the Tuner(Band)
Control
button.
Unit
The selection toggles back
and forth between "FM" and
"AM" each time the
Tuner(Band) button is
pressed.
1
Press the Function button to
Main
select the desired band (FM,
Unit
AM).
To Listen in Mono/Stereo
Press the MO/ST button. (FM only)
The selection toggles back and forth between "STEREO" and "MONO"
each time the MO/ST button is pressed.
In a poor reception areas, select Mono mode for a clear, interference-free
broadcast.
41
Downloaded From TheatreSystem-Manual.com Manuals
2
Select a broadcast station.
When the
button is pressed, a preset
Auto Station 1
broadcast station is selected.
Hold in the
button. Automatic searching
Auto Station 2
begins, and then stops when a station is tuned in.
Press the
button to tune to the chosen
Manual Station
station. The frequency changes incrementally in either
direction each time the corresponding button is pressed.
2
Select a broadcast station.
Press the Stop (
) button to select the PRESET
Auto Station 1
mode. Then press the
button to select a
station stored in the preset. See the instructions on the
next page to preset stations.
Auto Station 2
Press the Stop (
) button to select the MANUAL
mode on the front panel. Then hold in the
button to make the unit begin automatically searching for
broadcast stations.
Manual Station
Press the Stop (
) button to select the MANUAL mode
on the front panel. Press the
button to tune
to the desired station. The frequency changes
incrementally in either direction each time the
corresponding button is pressed.
Audio
MO/ST

Presetting stations

You can store up to:
15 FM stations
15 AM stations
Example: Presetting FM 89.1 in the memory
1
2
Press the Tuner(Band) button
Select MANUAL by pressing
and select the FM band.
the Stop (
main unit.
The selection toggles back and forth between "FM" and "AM"
each time the Tuner(Band) button is pressed.
L
R
L
R
MH
Z
4
5
Press the Program button on
If you want to save 89.1 to another
the remote control, FM1 will
preset location(FM2~FM15), press
flash. If you want to save 89.1
or
, then press
to FM1, press Program again.
Program to save it to that location.
PRGM
L
R
L
R
MH
Z
L
R
To tune in a preset station
See the previous page.
• FM
Frequency Modulation
• AM(MW)
Medium Wave
3
Use the
and
button to tune to 89.1
) button on the
L
R
6
To preset other stations,
follow steps 1~5 again.
PRGM
MH
Z
MH
Z
MH
Z
42

Advertisement

Table of Contents
loading

Table of Contents