Trigger Lock
7. Press front button in to lock the trigger. Press back
button to unlock trigger.
9. Attach nozzle to lance
by pushing into place.
13. Attach the "silver"
collar directly to the power
washer water inlet and
hand tighten.
17. Plug machine into a
grounded outlet, push
reset button.
Trigger Unlock
10. Remove nozzle by
pulling collar back on
lance and pulling out
nozzle.
14. Remove washer
filter, then using an
allen wrench, tighten
until snug. DO NOT over
tighten.
18. Turn on water.
11. Fill detergent tank. Do
NOT use thick detergent
as it can clog the power
washer.
15. Replace the washer
filter.
OFF/0
OFF/0
ON/I
ON/I
19. Switch ON and OFF
positions.
8. Connect lances to spray
gun, insert lance into spray
gun, push together and
at the same time twist
clockwise to lock in place.
Removing push together
and twist counterclockwise
then pull apart.
12. Pull clear siphoning
tube through cap so it
will draw detergent from
bottom of tank.
16. Attach garden hose
to the blue collar.
3