Ams95 Wiring Diagram - Amana AMS95 Installation Instructions Manual

AMS95 WIRING DIAGRAM

C I R C U L A T O R
B L O W E R
WARNING:
STEADY ON = NORMAL OPERATION
OFF = CONTROL FAILURE
1 FLASH =
SYSTEM LOCKOUT (RETRIES/RECYCLES EXCEEDED)
2 FLASHES = PRESSURE SWITCH STUCK CLOSED
3 FLASHES = PRESSURE SWITCH STUCK OPEN
4 FLASHES = OPEN HIGH LIMIT
5 FLASHES = FLAME SENSE WITHOUT GAS VALVE
6 FLASHES = OPEN ROLLOUT
7 FLASHES = LOW FLAME SIGNAL
8 FLASHES = CHECK IGNITER OR IMPROPER GROUNDING
CONTINUOUS/RAPID FLASHES = REVERSED 115 VAC POLARITY
RATING OF AT LEAST 105 °C. USE COPPER CONDUCTORS ONLY.
Wiring is subject to change, always refer to the wiring diagram on the unit for the most up-to-date wiring.
36