TRANSFERRING THE PROJECT DATA
STEP2
1. TRANSFERRING THE PROJECT DATA
STEP2 TRANSFERRING THE PROJECT
1. TRANSFERRING THE PROJECT DATA
Transferring the Project Data
1-1
1. Connecting the personal computer to the GOT
Use a USB cable to connect the personal computer to the GOT.
Personal computer
*
For the USB communication with the GOT, install a USB driver.
The USB driver is installed to the personal computer at the first connection.
Data can also be transferred using an SD card or connection methods other than the USB cable.
For how to transfer data using an SD card or connection methods other than the USB cable, refer to the help or
the GT Designer3 (GOT2000) Screen Design Manual.
USB cable
(GT09-C30USB-5P)
Connect to
the USB interface
GOT
Open the front cover and
connect the cable to the
USB interface.
1. TRANSFERRING THE PROJECT DATA
50