Mitsubishi Electric GOT2000 Series Quick Start Manual page 38

CREATING A PROJECT
STEP1
3. CREATING A FIGURE
4. Modifying the text of the copies
Double-
click!
10
Enter "STOP
switch".
11
35 3. CREATING A FIGURE
10
When the dialog shown left appears, set the
following item.
11
12
Click!
12
Modify the figure (Text) 3 with the same procedure.
Text: Running lamp
(A line feed can be inserted after the text
"Running" by pressing the Enter key.)
Creating the figures (Text) 2 and 3 is completed.
Double-click the copied figure (Text) 2.
Text: STOP switch
(A line feed can be inserted after the text
"STOP" by pressing the Enter key.)
Click the [OK] button.