Emptying the jug
Pay attention to the jug while juicing to prevent
spills through overfilling. If the jug is full, rotate the
speed selector (2) to the ''0'' (OFF) position,
remove the jug & pour the contents into a
The foam separator (13) can be used to keep any
foam in the jug. Return the jug to its position and
Emptying the pulp collector / strainer
If the pulp collector (3) becomes full before all of
the ingredients are used, rotate the speed selector
(2) to the ''0'' (OFF) position and unplug the Juicer.
Take hold of the pulp collector at the left edge, &
pull it away from the motor housing. The pulp
collector will swing open on its hinges. The
strainer (4) can be removed by lifting the tab at the
back. The pulp can be discarded and the strainer
returned to the pulp collector, which can then be
If the pulp collector (3) needs to be emptied,
rotate the speed selector (2) to the ''0'' (OFF)
position and unplug the Juicer.
Remove the cover (5) as described in "Before first
use" and lift the pulp collector from its location.
Empty it into a suitable container & re-fit it to the
motor housing. Replace the lid, making sure the
latches are closed, reconnect the unit to the
power supply & re-commence juicing.
How to take care of your Juicer
The Juicer must be cleaned thoroughly after each
Make sure the appliance is switched 'OFF' and
unplug the unit from the power supply before
NOTE: NEVER IMMERSE the motor housing (1)
IN WATER OR ANY OTHER LIQUID.
To clean motor housing, wipe clean with a damp
cloth. Allow to dry thoroughly before re-using or
storing. The removable parts of the juice extractor
assembly should be washed promptly after each
use with a mild detergent in warm water. These
parts are not dishwasher safe and must be hand
Use a brush to scrub pulp residue from the cutting
teeth and strainer holes of the sieve (14).
After washing, rinse and allow all parts to dry
thoroughly before re-assembly and storage.
Never use a metal brush to clean the sieve.
Take care when handling the sieve as the
blades are sharp.
Do not use the appliance if the rotating sieve is
Protecting the environment
Separate collection. This product must not
be disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose it off with other
household waste. Make this product available for
Separate collection of used products and
packaging allows materials to be recycled
and used again. Use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life. To
take advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf. You can check the
location of your nearest authorised repair agent by
contacting your local Black & Decker office at the
address indicated in this manual. A list of
authorised Black & Decker repair agents and full
details of our after-sales service and contact are
available on the Internet at: www.2helpU.com