To change play speed
– from "k0.6" to "k1.4" (in 0.1-unit steps)
≥ Press [1 PLAY]5 to return to normal play.
≥ After you change the speed
– Dolby Pro Logic II has no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to 48 kHz.
≥ This function may not work depending on the disc's recording.
12, Repeat play)
A-B Repeat (To repeat a specified section)
Except [JPEG] [Xvid]
Press [OK]8 at the starting and ending points.
≥ Select "Off" to cancel.
[DVD-V] (with multiple subtitles)
To select subtitle language
≥ On iR/iRW, a subtitle number may be shown for subtitles that are
[DVD-V] (with multiple angles)
To select a video angle
Menu 2 (Video)
To select the method of conversion for video output to suit the type
≥ When the content is distorted, select "Video".
≥ This may have no effect with some sources.
To select zoom
Normal, 1, 2, 3
Menu 3 (Audio)
To make the dialogue in movies easier to hear
[DVD-V] [Xvid] (Dolby Digital, 3-channel or higher, with the dialogue
recorded in the center channel)
Playing from an USB device
You can connect and play tracks or files from USB mass storage class
Devices which are defined as USB mass storage class:
– USB devices that support bulk only transfer.
≥ Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
≥ It is not recommended to use a USB extension cable. The USB device
connected using the cable will not be recognised by this unit.
Connect the USB device (not supplied) to the USB port
When you press [EXT-IN]4 to select "USB", this unit
automatically starts playing the contents in the USB
≥ To playback a selected item, press [∫ STOP]5 and refer to "Playing
from the selected item" (
≥ For other operating functions, they are similar to those described in
"Playing Discs" (
11 to 13).
≥ Maximum: 259 folders (excluding Root folder), 2600 files, 16 characters for
≥ Only one memory card will be selected when connecting a multiport USB
card reader. Typically the first memory card inserted.
Changing the player settings
Press [DVD]4 to select "DVD/CD".
Press [START]B to show the START menu.
Press [3, 4]8 to select "Setup" and press [OK]8.
Press [3, 4]8 to select menu and press [OK]8.
Press [3, 4]8 to select the item and press [OK]8.
Press [3, 4]8 to make the settings and press [OK]8.
≥ To return to the previous screen, press [RETURN]D.
≥ To exit the screen, press [START]B.
≥ The settings remain intact even if you switch the unit to standby.
≥ Underlined items are the factory settings in the following menus.