Download Print this page

Symbols - Craftsman 315.115160 Operator's Manual

5-1/2 in., 19.2 volt cordless laser trim saw
Hide thumbs

Advertisement

Table of Contents
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
V
Volts
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
Alternating Current
Direct Current
n o
No Load Speed
Class II Construction
.../min
Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Safety Alert
No Hands Symbol
No Hands Symbol
No Hands Symbol
No Hands Symbol
Hot Surface

SYMBOLS

NAME
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear safety goggles or safety glasses with side
shields and a full face shield when operating this product.
Precautions that involve your safety.
Failure to keep your hands away from the blade will result in
serious personal injury.
Failure to keep your hands away from the blade will result in
serious personal injury.
Failure to keep your hands away from the blade will result in
serious personal injury.
Failure to keep your hands away from the blade will result in
serious personal injury.
To reduce the risk of injury or damage, avoid contact with
any hot surface.
7

Advertisement

Table of Contents
loading

  Also See for Craftsman 315.115160

  Related Manuals for Craftsman 315.115160