Advanced programmings and registrations
Programming functions of transaction keys
This section explains how you can program functions in each transaction keys
such as F,
h
or
entry of tendered amount.
Step
1
Turn the Mode switch to PGM position and select [System
Setting] then press
2
Enter
3
and press
programming mode.
3
Referring the following tables, enter the program code then
press corresponding transaction key.
4
If you wish to program another transaction key, return to
step 3.
5
Press
key to complete the program.
o
Program code tables
Default value of all the program codes are "0".
Program code for F,
Prohibit partial payment.
Prohibit tendered amount entry
Force to enter tendered amount.
Print breakdown of VAT.
(Option for Single item or Currency exchange (including partial
tendering foreign currency).)
Must be "0"
Maximum amount for subtotal and tendered amount.
e.g.) $9000, D4 = 9, D3 = 3
Maximum amount of change due.
Example 1: To set
F
entry (b = 0), and forcing to enter tendered amount (c = 4): D7 = 6.
Press
3o6000000Fo
E-78
m
keys. For example, programming
F
key.
key to set the register in the
o
and
k
keys.
h
Description
key as prohibiting partial payment (a = 1), not prohibiting tendered amount
F
key to force
Operation
>▪▪▪▪▪>F
3o
B▪▪▪▪▪Bm
(Program code)
The above example is for programming minus
key.
o
Selection
No = 0
a
Yes = 1
No = 0
b
Yes = 2
No = 0
c
Yes = 4
No = 0
Yes = 1
0
D4: Maximum value (0 ~ 9)
D3: Number of zeros (0 ~ 9)
Maximum value (0 ~ 9)
Number of zeros (0 ~ 9)
Program code
B
(a+b+c) D7
B
D6
B
D5
BB
D4 D3
BB
D2 D1