Configuring Your Printer
Verifying the network configuration
Printing the network configuration
Installing your printer on additional computers on the network
Connecting to another KODAK All-in-One Printer
10
To verify that you are connected to your wireless network:
1. Press Home .
2. Press
to select Network Settings , then press OK .
3. Press
to select View Network Configuration , then press OK .
The wireless network settings appear on the LCD.
If the printer is connected to your network, you will see the network name and
the word CONNECTED.
4. To scroll through the information, press
5. When you are done, press OK .
To print the current network configuration:
1. Load plain paper into the printer. (See
page
16.)
2. Press Home .
3. Press
to select Network Settings , then press OK .
4. Press
to select Print Network Configuration , then press OK .
The printer prints a summary of the network configuration.
To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software that came with your printer on each computer. Follow
the on-screen instructions.
If you are connecting to a newer model printer (for example, you already have an
ESP 7 printer and now you are adding an ESP 7250 printer), you must install the
software for the newer model.
If you are connecting to another ESP 7250 printer or to an older model:
On a computer with WINDOWS OS :
1. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility .
• If your wireless all-in-one printer (example: KodakESP7200+1133) is not
listed:
a. Select No, my printer is not listed , then click Next .
b. From the drop-down list, select your printer.
c. Select Network - Wireless/WiFi , then click Next .
When your printer is detected, driver installation begins.
www.kodak.com/go/aiosupport
.
Loading paper in the main paper tray,